|
|
|
INFORMATION DETAILS
ID: 31875484
|
Year: 2024
|
Make: Landpride
|
Model: RCR1248, RCR1260, RCR1272
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
RCR12 Series Rotary Cutters
The RCR1242, RCR1248, RCR1260 & RCR1272 Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.
|
| Available Models: RCR1242, RCR1248, RCR1260, RCR1272 |
|
Features and Benefits
|
| |
|
FEATURES
|
BENEFITS
|
| Surpassed rugged industry standards |
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| Tractor HP range |
20 - 50 HP |
| 3 Year gearbox warranty |
Shows our confidence in the gearbox integrity. |
|
Cat. 3 driveline with shearbolt
|
Shear bolt offers maximum driveline protection. |
| Cat. 3 driveline with 2-plate slip-clutch |
Slip-clutch driveline offers convenience for continual work. |
| Floating top link |
Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors |
| Round back design |
Helps discharge grass better than enclosed or partially enclosed cutters. |
| 1 1/4” - 10” Cutting Height |
Cutting height for wide range of cutting conditions. |
| Skid shoes (Accessory) RCR1260 & RCR1272 only |
Provides sidewall reinforcement and helps protect bottom of sidewall. |
| 1/2” x 3” Heat-treated free swinging blades |
Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub |
Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 10 Gauge stump jumper |
Allows cutter to slide over obstructions protecting the gearbox output shaft. |
| High blade tip speed |
Ensures clean cut. |
| Laminated tailwheel |
Laminated material is long lasting in rough conditions and can’t go flat. |
| Heavy-duty spindle on tailwheel |
1 1/4” spindle gives the strength to protect tailwheel assembly. |
| Rubber guarding |
Protect against flying debris. |
| Metal Guarding |
Protects against flying debris. |
|
| |
 Quick-Hitch Compatible
Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects. |
 Gearbox Warranty
3 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance. |
 1" Cutting Capacity
These cutters offers 1" cutting capacity. See Operator's Manual for more information. |
 Floating Top Link
Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors. |
 Optional Skid Shoes
Optional skid shoes on the RCR1260 and RCR1272 models provide sidewall reinforcement and helps protect bottom of sidewall. |
 10 Gauge Stump Jumper
Allows cutter to slide over obstructions protecting the gearbox output shaft. |
| |
|
Specifications & Capacities
|
| Model Numbers |
RCR1242 |
RCR1248 |
RCR1260 |
RCR1272 |
|
Weight
(With front & rear guard, shear bolt driveline & laminated tire)
|
383 lbs. (173.7 kg) |
400 lbs. (181.4 kg) |
478 lbs. (216.8 kg) |
564 lbs. (255.8 kg) |
| Hitch |
Category l (Quick hitch ready) |
| Cutting Width |
42" (1.07 m) |
48" (1.22 m) |
60" (1.52 m) |
72" (1.83 m) |
| Overall Width |
45 1/4" (1.15 m) |
53 5/8" (1.36 m) |
64 1/4" (1.63 m) |
76 1/2" (1.94 m) |
| Overall Length (Including Tailwheel) |
83" (2.11 m) |
89 1/8" (2.26 m) |
97 3/4" (2.48 m) |
110" (2.79 m) |
| Deck Height |
7 1/4" (18.4 cm) |
| Cutting Height |
1 1/4" - 10" (3.2cm. - 25.4 cm) |
| Cutting Capacity |
Grass, weeds & light brush |
|
Recommended Tractor
Horsepower
|
18-40 hp
(13.4-29.8 kw)
|
20-60 hp
(14.9-44.7 kw)
|
25 -60 hp
(18.6-44.7 kw)
|
| Power Take-Off Speed |
540 rpm |
| Gearbox Rating Horsepower |
60 hp (44.7 kw) |
| Gearbox (Speed up beveled gears) |
1:1.93 Speed-up
Cast iron housing
|
1:1.47 Speed-up
Cast iron housing
|
| Gearbox Lubrication & Capacity |
1.9 Pint (.9 L) With new Comer gearboxes - 1.1 Pint (0.52 L) of gear lube 80-90W EP |
| Deck Construction |
1 Piece reinforced deck |
2 Piece reinforced deck |
| Deck Material Thickness |
12 Gauge (2.7 mm) |
| Skids |
12 Gauge (2.7 mm)
(Formed in deck)
|
1/4" (6.35 mm)
(Welded on deck)
|
| Skid Shoes |
Not Available |
Bolt-on replaceable skid shoes (Sold separately through parts department only) |
| Stump Jumper |
Round Pan 10 ga x 24" (61.0 cm) |
| Blades (2) |
1/2" x 3" (13mm x 76 mm) Heat treated alloy steel
Free-swinging blades
|
| Blade Bolts |
Keyed with harden flat washer and locknut |
| Blade Tip Speed |
11,417 fpm
(58.0 mps)
|
13,256 fpm
(67.3 mps)
|
16,536 fpm
(84.0 mps)
|
15,033 fpm
(76.4 mps)
|
| Driveline |
ASAE Category 3 |
| Driveline Protection Options |
1/2" (13 mm) Center shear bolt protection or center bolt 2 plate slip clutch |
| Tailwheel |
4" x 8" Laminated tire and yoke |
| Safety Guards |
Rubber (standard front and rear) |
|
Stock Number :E10389
Back
|
|
|
|
Address:
