Transmission

12+12 or 16+16 gears.

The fully mechanical and completely synchronized speed change system guarantees high levels of reliability and efficiency, maximizing the power transferred to the wheels and limiting fuel consumption, irrespective of working conditions, while also increasing towing capacity. All Series 3 models are equipped with a 3 x 4-speed gearbox with the shuttle as standard, offering a total of 12 forward and 12 reverse gear ratios, which allow the machine to be operated at a forward speed of just 0.96 km/h at the lowest gear ratio and the engine running at full speed, and a top speed of 30 km/h with the engine at partial capacity, so as to limit noise, vibration and fuel consumption.

For applications that require ultra-low speeds, the machines may also be equipped with an optional super-creeper gear, which, in addition to increasing the number of available gear ratios to 16 + 16, makes it possible to achieve speeds of just 260 meters per hour. The gearbox control levers are positioned ergonomically under the steering wheel. To optimize traction under the most difficult conditions, simultaneous 100% locking of both differentials is standard on all models, complete with an electro-hydraulic control system.

PTO

All the options you need.

The PTO, which is completely independent of the main transmission, is fitted as standard as the rear version and features the traditional 540 rpm mode; it can be engaged easily and rapidly, thanks to the ergonomically designed control device. An electro-hydraulically operated 1000 rpm frontal PTO option is also available, while, in order to increase versatility even further, machines may also be supplied with a bottom-mounted 2000 rpm version, ideal for maintenance of green spaces.

Hydraulic system

Powerful and versatile.

The standard configuration includes a 30 l/min hydraulic pump dedicated to the rear lifter, which offers a load capacity of 1320 kg, and the rear, 4-way distributors (also available as an optional 6-way version). An additional 15 l/min pump is dedicated exclusively to the power steering system, guaranteeing ease of steering and maneuverability even at low engine speeds and under maximum load conditions. The rear lifter, which features strain control as standard, is available with category a 1 and 2 three-point linkage, which may also be fitted with quick hitch couplers. The hydraulic control levers are handily positioned on the right-hand mudguard. The availability of a front lifter having a load capacity of 730 kg, together with two (duplicate) front-mounted hydraulic outlets and/or two bottom-mounted hydraulic ports, further enhances the versatility of this small but complete tractor.

Brakes

Extremely rugged and highly customisable.

Series 3 tractors are fitted with axles specially designed by the manufacturer. The elevated steering angle, coupled with the reduced wheelbase typical of vehicles in this category, means that the Series 3 range is able to guarantee excellent manoeuvrability, even in the tightest of spaces.

Cab

A compact solution with all the comfort of full-sized tractor.

The new DEUTZ-FAHR Series 3 models are also available with a spacious 4-pillar high visibility cab designed specifically by the manufacturer for this range of machines. The intelligently designed interior and rational control layout offers an ergonomic working environment, while the spacious driver zone and effective air conditioning system take operator comfort even further. Other distinguishing features include the new, highly ergonomic steering wheel, and the telescopic steering column. The cabin versions include a range of heating and ventilation functions as standard, while an optional air conditioning system, complete with an over-capacity rated compressor unit, is also available. Additional options include active carbon air filters and a rear windscreen wiper.