|
|
|
INFORMATION DETAILS
ID: 13878067
|
Year: 2018
|
Make: Brillion
|
Model: Pulverizer
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
|
|
Description
|
The Brillion Pulverizer has been synonymous with quality seedbed preparation for well over 100 years.
|
It’s About Higher Yield
All models in the Brillion Pulverizer line have a common denominator…HIGHER YIELD. Producers know that higher yields start with a properly prepared seedbed and a firm seedbed is critical to maintain a uniform planting depth. The ideal seedbed should be firm with fine particles at the seed depth and should have a layer of loose mulch on the surface to slow evaporation and conserve moisture.
|
|
Many of the most valuable nutrients are locked in the clods and root crowns left in the field. The Pulverizer crushes those clods and breaks down the root crowns to release those nutrients for use by the crop. At the same time, air pockets are eliminated and moisture is drawn into the root zone through capillary action. Good seed to soil contact creates more uniform germination, pollination and maturity…and that means increased yields and greater profits. |
|
It’s About the Soil
The Brillion Pulverizer line is a genuine asset to the value of the soil and can be the missing link in improving the soil from mediocre to a good growth environment with just a single pass. The ribs or ridges on the Pulverizer wheels/rolls are the real workhorses; residue is anchored into the surface of the seedbed so it can’t be blown or washed into road ditches, water ways, culverts, etc. The ribs form a distinct texture on the surface that allows the soil surface to breathe in the event of a crusting rain. The soil will normally split and crack along the rib cuts to allow oxygen and water to enter the soil and to give small seeds a place to grow through. Some producers also utilize the Pulverizer (equipped with notched wheels) in a post-plant mode, further firming the seedbed for optimum germination.
|
|
It’s About Smooth
The Brillion Pulverizer will put a smooth, textured finish on the seedbed. The smooth seedbed allows for closer to the surface harvest in a soybean field and the ultimate opportunity for high-speed cutting and harvesting of alfalfa. The smooth seedbed also has any small to medium sized stones pushed into the soil to lessen the occurrence of ingestion by a combine or forage harvester.
|
|
Endless Models and Wheel Options
Brillion offers Pulverizer models in sizes from 5’ up to 52’. There are three-point hitch models, rigid transport pull-type models, and folding pull-type units available. Each series has its own unique features and choice of Pulverizer wheel options.
|
|
New Upgrades for 2015/2016
The X, XL, and XXL Series Folding Pulverizers have been updated to include 1 ¾” trunnion mounted bearings and 8” roller axles (similar to what is offered on the Wing Float Series). The new 22” V-Style Wheel has been added to fit the needs of the dry land producer who wants to anchor residue and reduce wind erosion. Visit our Features and Specs pages for more details!
|
|
|
|
Features
|
Endless Options and Sizes to Accommodate Any Operation
-
Gray Iron Wheels Covered by Standard 1-Year Warranty
-
Ductile Iron Wheels Covered by 5-Year Limited Warranty
-
1 ¾" Trunnion Bearings on X, XL, XXL and Wing Float Pulverizers Covered by 3-Year Limited Warranty
-
Scraper Kits Available for Notched Wheel Types and V-Style Wheels
-
Powder Coat Paint
|
WFP Series, Wing Float Pulverizer - 22' to 36' Models
-
Patented Wing Float Design
-
Working Widths From 23’4" to 37’4"
-
Transport Heights Under 11'
-
Transport Width 14'
-
Telescoping Drawbar on 28' to 36' Models
-
8" Pulverizer Axle Size
-
1 ¾" Trunnion Bearings
-
Maintenance Free Rockshaft Bearings
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron
-20" Optimizer® Ductile Iron
-20" Crowfoot Ductile Iron
|
WFP Series, Wing Float Pulverizer - 38' to 52' Models
-
Patented Wing Float Design
-
Working Widths From 38’ to 52’
-
Transport Heights Under 10'
-
Transport Width 17'5" on 38' to 46' Models
-
Transport Width 19’8" on 50’ Model
-
Transport Width 21’8" on 52’ Model
-
Telescoping Drawbar
-
8" Pulverizer Axle Size
-
1 ¾" Trunnion Bearings
-
Maintenance Free Rockshaft Bearings
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron
-20" Optimizer Ductile Iron
-20" Crowfoot Ductile Iron
|
X Series, Folding Pulverizer - 20' to 26' Models
-
Working Widths From 20’1" to 26’1"
-
Transport Heights Under 8'2"
-
Transport Width 11'
-
8" Pulverizer Axle
-
1 ¾" Trunnion Bearings
-
Maintenance Free Rockshaft Bearings
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron
-20" Optimizer Ductile Iron
-20" Crowfoot Ductile Iron
-20” Notched Ductile Iron H (Heavy)
-22” V-Style Ductile Iron
|
XL Series, Folding Pulverizer - 28' to 36' Models
-
Working Widths From 28’9" to 36’9"
-
Transport Heights Under 8'1"
-
Transport Width 15'1"
-
Telescoping Drawbar
-
8" Pulverizer Axle
-
1 ¾" Trunnion Bearings
-
Maintenance Free Rockshaft Bearings
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron
-20" Optimizer Ductile Iron
-20" Crowfoot Ductile Iron
-20” Notched Ductile Iron H (Heavy) - 28' to 32' Models
-22” V-Style Ductile Iron
|
XXL Series, Folding Pulverizer - 38' to 46' Models
-
Working Widths From 38’4" to 46’4"
-
Transport Heights Under 8'9"
-
Transport Width 18'1"
-
Telescoping Drawbar
-
8" Pulverizer Axle
-
1 ¾" Trunnion Bearings
-
Maintenance Free Rockshaft Bearings
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron
-20" Optimizer Ductile Iron
-20" Crowfoot Ductile Iron
-22” V-Style Ductile Iron
|
PT Series, Rotating Frame Transport Models
-
Working Widths From 10’ to 20’
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron
-20” Optimizer Ductile Iron
-20” Crowfoot Ductile Iron
-22” V-Style Ductile Iron
|
P Series, Pull-Type/No Transport Models
-
Working Widths From 5’ to 16’
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron - 5' to 16' Models
-16” Notched Gray Iron - 5’ to 8’ Models
-16” Crowfoot Gray Iron - 5’ to 8’ Models
-20" Crowfoot Ductile Iron - 10’ to 16’ Models
|
PP Series, Three-Point Hitch Models
-
Working Widths From 5’ to 20’
-
Cat. I Three-Point Hitch on 5' to 7' Models
-
Cat. I, II Three-Point Hitch on 8' to 20' Models
-
Pulverizer Wheel Styles:
-20" Notched Ductile Iron - 5' to 20' Models
-16" Notched Gray Iron - 5' to 8' Models
-16" Crowfoot Gray Iron - 5' to 8' Models
-20" Optimizer Ductile Iron - 10' to 20' Models
|
PFT Series, Floating Ring Models
-
Floating Ring Design Best Suited for Use with Companion Primary Tillage Tool
-
Cat. II, III Three-Point Hitch Models Available in Sizes from 6' to 18'
-
Pull-Type Models Available in Sizes from 10' to 22'
-
20" Ductile Iron Rings with 14" Inside Diameter
|
SD Series, Double Gang Models
-
Double Roller Configuration - Same Foundation as on Brillion Sure Stand Seeders
-
6', 8', 10' or 12' Three-Point Hitch Models Available
-
Pull-Type Models Available in 8', 10' or 12' Sizes
-
Gray Iron Pulverizer Wheels with Larger Diameter Wheels on the Front Roller
|
Back
|
|
|
|
Address:
