|
|
|
Documents:
|
|
INFORMATION DETAILS
ID: 13696964
|
Year: N/A
|
Make: Mueller
|
Model: Avalanche® HiPerForm® Chillers
|
Type: New
|
MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
The electronic HiPerForm® technology that sets Mueller cooling equipment above the competition is now available on large discuss compressors. Enjoy the HiPerForm efficiencies on a larger scale with the 15 and 35 horsepower HiPerForm Avalanche chiller.
This system is controlled by the Mueller EVC control board. Multiple times a second the control collects system pressures and temperatures to determine the right flow of refrigerant at the right time. This feature is crucial as that high group is milking and seconds matter when milk is flowing through the pipe line. Couple this chiller with a remote condenser and pump skid for a quick and easy installation.
|
Features and Benefits
|
Avalanche® Chiller
-
Chiller skid dimensions: 60" L x 38.75" W x 64" H
-
Chiller shipping weight: 1,073 lbs. for 15 hp and 1,375 lbs. for 35 hp.
-
Multi-Stage Chiller Control with up to ten independent programmable stage. This control is equipped with two temperature sensors and two motor starters allowing control over both glycol pumps.
-
Single point electrical service connections.
-
Built in over-current protect.
-
Compressor contactor installed in enclosure.
-
Remote start capabilities grants control to the chiller inside the milk house preventing that unnecessary trip to the utility room.
-
Copeland Discus compressor, available in 15 pr 35 horsepower.
-
Oil pressure safety control mounted and wired.
-
Dual pressure control mounted and wired.
-
Freeze protection safety control, pressure operated.
-
Single unloader on 15 hp and dual unloader on 35 hp, mounted and wired.
-
Brazed plate evaporator, electronic subcooling valve and accumulator/heat exchanger installed.
-
Two inch water connections on brazed plate evaporator.
Remote Condenser
-
High efficiency condenser coils comprised of aluminum fins and copper tubes.
-
Direct-drive condenser motors, VFD ready.
-
Controls box ships separately.
-
Vertical air discharge.
-
Heavy-duty galvanized steel cabinet.
Pump Skid
-
Pump skid dimensions: 88.5" L x 42.625" W x 49.625" H
-
Pump skid shipping weight: 956 lbs.
-
Single or dual pump options.
-
Approximately 250 U.S. gallon reservoir.
-
Wye strainer and isolation valve mounted.
|
Back
|
|
|
|