Features:

• UV-resistant
• Good stability as the overall design ensures a low center of gravity
• Main tank has an overcapacity of 5%, making filling a safe task
• 4 gal. clean water hand wash tank
• Available with or without Rinse Tank and Tank Flush Nozzles
• Tank contents indicators situated in the front and on the side of the tank
• Top operated drain valve in the sump of the tank
• Efficient Venturi agitation
• Powder mixer placed in the filling strainer
• Tank warranty - 5 years under normal working conditions

Air Kits & Deflectors

SF65 & SF85 air kits

The SF Air Kits are provided with 13 air vanes in the air inlet. Together with the unique channel plate situated in the air outlet, these vanes generate an evenly distributed air stream to assure the best possible application.

• SF65 provides up to 65.000 m3 air/h
• SF85 provides up to 85.000 m3 air/h

Both the SF65 and SF85 can be fitted with all  the different available Deflectors

Spouts, Booms & Blowers

Spouts

The droplets in the pneumatic system are formed when the spray liquid is torn off a shear plate by a high-speed air stream. As regards the hydro-pneumatic system, the pressure and the size of the nozzle determine the volume and the droplet size.

Pneumatic spouts (left picture)

• 1 - 4 atomizers or Paraflow tubes with 6 atomizers.
• Low volume application technique.
• Calibration by means of a restrictor plate.
• The Pneumatic spout system features shear plates where it is the air speed that determines the droplet size.
• Application volumes up to 18 gpa.
• Working pressure up to 60 psi.
• Droplet sizes are fine to medium

Hydropneumatic spouts (right picture)

• 3 or 5 ceramic nozzles situated in the air stream.
• Allows applications up to 85 gpa.
• Working pressure up to 145 psi.
• Droplet sizes are medium to coarse, depending on the nozzle size.

Pneumatic spouts (left picture) / Hydropneumatic spouts (right picture)

IRIS 2 is available on the B11, B50 and B51 booms

• B50 & B51 come in Y and Z hydraulic versions
• B50 & B51 Row spacing: 51 - 145 "
• B51 has a center section with trapeze suspension and shock absorbers

E20 vine boom

The E20 is an exceptionally versatile boom developed specially for vineyards with vines grown in different conditions: Row spacing, canopy pruning, etc. It can be adjusted to spray 2 or 3 rows, depending on the growth and density of the vegetation.

• The two & half row E20 boom provides for 47 inches of row width extension on both the left and right booms.
• Fully hydraulic: all boom movements are managed directly from the cabin: width adjustment, lift functions and tilting of boom ends
• Two rows are enveloped and sprayed entirely or the flip over boom is orientated towards the third row side.
• The outer nozzle can be hydraulically positioned for more precision application.
• A preferred boom in vine yards where operators search for the benefit from the flip over boom when obstacles are encountered in the row.
• Pneumatic or hydropneumatic spout sets

Turbine Air kits

The turbine air kits are our secret to give you first class application. Designed by aerodynamic specialists, the air kits have better air distribution, a lower noise level and lower power consumption.

The ARROW and MERCURY sprayers can be adapted to all types of plantation systems, thanks to HARDI’s full range of air kits. The fans and turbines are made of steel and aluminium and incorporate a centrifugal clutch (patented) that assures minimum wear to the sprayer and to the tractor.

With 5 turbine kits to choose from (2 of the kits are only for the IRIS system),  air volume ranges from 10000 m3 air/h up to 27000 m3 air/h.

HARDI turbine air features:

• Air volume ranges from 10000 m3 air/h up to 27000 m3 air/h
• Can be used with a wide range of booms and spout sets
• Two speed gear box with neutral position.
• Centrifugal clutch
• Transport lights
• Low power consumption